Home Adverts Recent Added Auction Scam Alerts New Forum Old Forum List Your Ad ShopAds Videos
Tropical Fish Aquariums & Equip Marine Fish & Marine Inverts Cichlids Malawi Tanganyikan Cichlids
Wanted Discus Goldfish, Koi & Ponds Retailers & Services ALL ADS By County

Welcome to the NEW Aquarist Classifieds Fishkeeping Forum


Go Back   Aquarist Classifieds Fishkeeping Forum > Fishkeeping Forum > Koi, Fancy Goldfish & Ponds
Register Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Koi, Fancy Goldfish & Ponds If you are into Koi and pondkeeping, including fancy goldfish and all aspects of water gardening, then this is the section for you. Fancy goldfish are welcome here.

Reply
 
Thread Tools Display Modes
  #1  
Old 08-30-2008, 10:00 PM
sumo2001 sumo2001 is offline
Junior Member
 
Join Date: Apr 2008
Posts: 11
Default fish pond

hi
wanted to build an above ground pond out of 4 X2 timber and 18mm ply and then line it with a pond liner .its going to be between 12 - 16 ft long by between 6 - 8 ft wide and 4 ft deep.was planning on having the spacings between the uprights at approx 200mm with 4X4 corner posts with 4X2 length of total pond as top and bottoms in one piece.spacewill be insulated with celotex or polystyrene depends on final budget .outside will be clad with some form of cladding.filter will be pump fed with gravity return.
will be work okay please?didn`t want to go to exspense of concrete blocks etc as budget won`t be massive i`m afraid
cheers
giorgio
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2  
Old 08-31-2008, 10:19 AM
Merlin Merlin is offline
Member
 
Join Date: May 2008
Location: Slough, Berks
Posts: 97
Default

Hi Giorgio

At 12 x 8 x 4ft the pond would hold 2,400 gallons of water , that water presure alone would in my mind cause the longest lenght of your pond to bow outwards. If you were thinking of sinking 2ft of the pond below ground, you might be OK , but 4ft above ground using 4 x 2 timber will cause you problems. The only time I have seen a pond built using 4 x 2 timber, the ponder hired a steel banding unit to wrap 4 steel bands around the unit, then covered the whole thing with tongue and groove wood to finish it off. The steel bands gave the walls of the pond the added strengh that was needed.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3  
Old 09-04-2008, 10:07 PM
wolfy wolfy is offline
Junior Member
 
Join Date: Aug 2008
Location: barnoldswick lancashire
Posts: 20
Default

Quote:
Originally Posted by sumo2001 View Post
hi
wanted to build an above ground pond out of 4 X2 timber and 18mm ply and then line it with a pond liner .its going to be between 12 - 16 ft long by between 6 - 8 ft wide and 4 ft deep.was planning on having the spacings between the uprights at approx 200mm with 4X4 corner posts with 4X2 length of total pond as top and bottoms in one piece.spacewill be insulated with celotex or polystyrene depends on final budget .outside will be clad with some form of cladding.filter will be pump fed with gravity return.
will be work okay please?didn`t want to go to exspense of concrete blocks etc as budget won`t be massive i`m afraid
cheers
giorgio
i jusj built my own pond its just a bit bigger than yours and it wasnt that expensive it came to around £400 i used 9 inch hollows filled with concrete better to be safe than sorry ???!!!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off
Forum Jump


All times are GMT. The time now is 01:46 PM.

 


Adverts Previous Fish Biz Sitemap Links All Sponsor Clubs Webmaster Our Sponsors ShopAds

Search Engine Friendly URLs by vBSEO 3.0.1 ©2007, Crawlability, Inc.