| Posted |
is this going to be hard jewl 350 background |
24-10-2006 23:19 by tomdoc
|
hi there i have a trigon 350 marine setup wiv not a lot of rock atm and only 5 fish and i brought the tank with the 3d background already glued in .. i have now changed my mind and decided it needs to come out silly time i no but it really dose is this going to be to take out with water and everything still in ?? |
24-10-2006 23:37 by telboy
|
got a pic tomdoc?
|
25-10-2006 00:04 by tomdoc
|
of the tank
|
25-10-2006 12:00 by jonie
|
yep i fink thats what he wants |
25-10-2006 12:59 by von
|
Also you'll find the silicone will leave marks on the glass that will be hard to remove unless tank is empty |
25-10-2006 12:59 by von
|
Is that Tom? i'm afraid i glued that in rather well and it will probably break into pieces if you pull on it, rather than using blobs of silicone i covered the edges all the way round so they wouldn't lift. |
25-10-2006 13:00 by tomdoc
|
aaa ok von so the tank needs to be empty then .. lol |
25-10-2006 13:01 by tomdoc
|
aaa ok von so the tank needs to be empty then .. lol |
25-10-2006 13:05 by von
|
Sorry, i put a background in and found it lifted and curled a little at the edges where they meet and you could see light through so i removed it and started again, i don't fancy your chances getting it off with water in it, in fact i know you won't. I put it to last, sorry |
25-10-2006 20:40 by tomdoc
|
its ok ill wait till i have to move the tank and empty it then take it off |
 |
 |