Home Adverts Recent Added Auction Scam Alerts Fishkeeping Forum List Your Ad ShopAds Videos
Tropical Fish Aquariums & Equip Marine Fish & Marine Inverts Cichlids Malawi Tanganyikan Cichlids
Wanted Discus Goldfish, Koi & Ponds Retailers & Services ALL ADS By County

Home      Reply		Viewed: 440 -- Replies: 15
PM | All Topics | General | Cichlids | Marine | Coldwater | Tanks/Equipment | Diseases | Members

Posted	Glass cutter hole saw
06-01-2007 12:08 by Ed	Does anyone know where i can get some hole saw cutters as i want to drill my tanks i couldnt find anything on ebay.
06-01-2007 12:21 by paul stevens	Ed if you get a hammer x marks the spot then give a good heathy swing and hit the x....
06-01-2007 12:31 by Ed	I tried that paul but it broke the glass and i told the misus that a sledge hammer was too heavy use a club hammer.
06-01-2007 12:48 by Linda Chenapa	Try asking you lfs, they may have one you can borrow. If not, the problem with marking the spot with an X is you should use a O as that is the type of hole you want, also use a ladies shoe not a hammer. A hammer is for knocking screws in, I thought all ladies knew that? And no, not a screw driver, they are for getting lids off things.
06-01-2007 12:52 by darren	http://www.machinemart.co.uk/rangeguides.asp?t=734&g=115&r=2199
06-01-2007 12:58 by wayne	http://search.ebay.co.uk/search/search.dll?sofocus=bs&sbrftog=1&catref=C12&from=R10&satitle=DIAMOND+DRILL&sacat=631%26catref%3DC6&sargn=-1%26saslc%3D3&sadis=200&fpos=en10+6bs&ga10244=10425&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=11%26fsoo%3D1&coaction=compare&copagenum=1&coentrypage=search
06-01-2007 13:14 by paul stevens	Not herd of the hyper link wayne..
06-01-2007 13:24 by nige	i use a tile cutter from b and q i think the one i used was about £12 and so far its cut 6 holes
06-01-2007 13:36 by Ed	Thanks guys found the right bit from the link wayne put on its called 365 drills very helpfull bloke and you do not have to drill either side of the tank just straight through.
06-01-2007 13:46 by Ed	Nige what type of cutter was it.
06-01-2007 13:53 by nige	it was just a cramic tile hole cutter, is just got electro plated diamonds. it may have been even cheaper than that but its in the drill bits section.
06-01-2007 13:57 by nige	look kinda like this only all silver http://cgi.ebay.co.uk/Set-5-SINTERED-Diamond-Hole-Saw-holesaw-drill-tiles-PRO_W0QQitemZ320064201447QQihZ011QQcategoryZ122754QQcmdZViewItem
06-01-2007 14:02 by nige	these are them, only these look lower quality http://search.ebay.co.uk/hole-saw-diamond_W0QQcatrefZC6QQcoactionZcompareQQcoentrypageZsearchQQcopagenumZ1QQfromZR10QQfsooZ1QQfsopZ3QQftrtZ1QQftrvZ1QQga10244Z10425QQsaprchiZQQsaprcloZQQsascsZ2QQsbrbinZtQQsbrexpZWD4SQQssPageNameZWD4S
06-01-2007 14:15 by Danny Boy	http://search.ebay.co.uk/search/search.dll?from=R40&satitle=glass+hole+cutter
06-01-2007 14:18 by Ed	28mm cutter for £18 ,there are cheaper ones but i will be doing quite a few and if anyone wants to use after just let me know.
06-01-2007 15:50 by nige	is that from b+q? i think mines 38mm if anyone wants to use it now you mention it ed.

Previous | Fish Biz | Sitemap | Links | All Ads | Clubs | Webmaster | Our Sponsors | ShopAds Visits