| Posted |
For Red Hook |
15-02-2007 17:49 by trik
|
this is how i set up the 6x2x2 on hi density blocks , lintels, ply, and poly, HTH mate
|
15-02-2007 17:51 by trik
|
dont no why they didnt work, i used the html tag to.?????????
|
15-02-2007 17:52 by trik
|
try again
 |
15-02-2007 17:52 by trik
|
thats better
 |
15-02-2007 17:53 by trik
|
 |
15-02-2007 17:53 by trik
|
 |
15-02-2007 17:54 by trik
|
unless you can only do 1 html tag per reply, |
15-02-2007 17:56 by Red hook
|
thanks trik just got to decide wood or blocks |
15-02-2007 18:19 by trik
|
ok mate good luck anyway, look forward to see it in the build. |
15-02-2007 18:25 by saz
|
Looks like someones goin to be busy |
15-02-2007 19:10 by Red hook
|
trik the lintels are100x140 are these big enough |
15-02-2007 19:35 by trik
|
YES mate thats what mine were. |
15-02-2007 19:42 by Red hook
|
sorry to soundthick trick its just other half is panic it will collapse even more so now ive shown her the photos and there is no middle leg to support centre |
15-02-2007 19:43 by Red hook
|
sazzy not only going to be busy but SKINT *** kids |
15-02-2007 20:27 by saz
|
lol, same ere but its not the kids |
15-02-2007 21:31 by trik
|
thats why you use the lintels mate tell her, they will hold tons of weight, thats why we use them to hold up our houses, put her on to me mate. That tank ran for 6 months as set up, lol, now tel boy has all the building mats doing hes tank and paul has my old tank, lol |
16-02-2007 07:44 by Red hook
|
thankr trik . the tank is going into an out building joined to our house which has a toilet coal storage room the large room we put freezer ,tumble dryer in ,the floor is concrete with wickes ceramic floor tiles 1 foot square will the tiles be ok or will they break ,last question trik so ill stop being a pain |
16-02-2007 08:04 by webmaster
|
trik, you cannot add pics / html code on first post, as this would distort the listings page. |
16-02-2007 08:52 by trik
|
o ye i forgot
red hook if the tiles are laid on the addesive correctly it should be fine, but if the addesive dont fully cover the tile then they will crack, to be safe i would take the tiles up where the blocks are going to stand. |
 |
 |