| Posted |
diy calsium reactor |
14-08-2007 09:49 by JOHANSWAN
|
ive decided to build my own calsium reactor after keep losing bids on e-bay,sometimes people bid more for equipment than what they cost new i will try to place some photos |
14-08-2007 09:55 by JOHANSWAN
|
ive made a venturi for the suction line so i can have feed without adding a feedpump and my feed work brilliant with 12liters an hour wich i can adjust to slower and ive got 2kg calsiumarm
|
14-08-2007 10:00 by JOHANSWAN
|
ive got a juwel vision 180 and will install the reactor tommorow as ive got a big co2 bottle wich i am going to put under the floor and will run the reactor with a ph-controller however can i send my feed through my phosfate reactor before it enters the sump?
|
15-08-2007 14:34 by telboy
|
you're very good at this DIY malarky johanswan...nice tank too mate |
15-08-2007 21:26 by JOHANSWAN
|
cheers telboy |
15-08-2007 22:11 by -Rob C-
|
Looks very good, how much cheaper did it work out than eBay then?
Nice tank aswell  |
16-08-2007 11:20 by JOHANSWAN
|
hi rob to be honest it cost me in all about 10 quid to make the reactor as i had all the material at hand as the seethrough was one off the artificialjobbies that broke and a friend gave it to me i am a mechanical craftsman and were able to make it in my sparetime at work as i work shift took me about 12 hours to make and next project will be a nitrate reductor and then a kalkstirrer will keep the photos coming
|
16-08-2007 11:22 by JOHANSWAN
|
the improvement off the calsuimreactor ive added
|
 |
 |