Fish House/Fish Room Aquarium Racking/Unit. 14 Tanks Tropical Fish Breeding Setup. Drains and ball valves for semi automatic water changes. It includes water butt and pump for mixing new water.
2 Tiers, each of 7 Fish tanks 18x15x12
All Drilled for drainage, and ball Valves for filling.
Racking made of in Panels bolted together for easy relocation.
The racking is insulated with 2” Foam insulation board and has front covers to keep the heat in so that it can be kept in an unheated shed or garage.
There are 8 heaters between 50-100w. One heater is put in every other tank and this is more than enough to keep all tanks up to temperature while keeping the wattage low.
There is a large sponge heater in every tank run by a 120w air compressor.
There are LED strip lights placed over the tanks on timers and each tank has an condensation tray.
The unit has gang sockets built into it for the electrical needs.
Its a really solid unit which will last for years and means you can have a fish house/Fish room set up in your shed or garage without having to convert the whole thing.
Each drain outlet is placed approx 1/2 way down and has an individual tap with can be turned on to drain the tank as much as you’d like down to half way. These drains are all connected and run to a hose which can be drained outside for watering the garden.
Included is a large Water but with two ball valves, I fill the butt up to the first ball valve and then fill the rest of the butt up to the top ball valve with RO water and mixed with treatment to remove chlorine, this is then pumped into the fish tanks and will fill up to the ball valves of the tanks. This makes the whole water change process very automated and easy with very little time involved as I can set it off and go and do other things.
The whole thing including all of the fittings cost me well over £1600. I couldn’t believe it when I added it all up! I'm only asking £800 for it.
This whole system includes everything you need to run a breeding project or just enjoy keeping many types of fish. Every nut, bolt, tube, fitting and wire are included.
I’m currently breeding Angelfish but I’ve used it to breed guppies and endlers in the past. The fish are not included in the sale and are for sale separately but if there are any left over when you come to purchase it I’d happily include them.
I still really enjoy having it but my life has just got too busy with work for me to have time to enjoy it.
There are many extras such as food, treatments and fittings which I'd be happy to give to the purchaser at no extra cost.
A lot of work and went into this project, the time to build and drill all the tanks is something I really underestimated. You'll save a lot of effort, time and money if you buy this.
This is a List of the items for sale and the new price which I paid for them.
24 x 150mm coach bolts M12 £18.99
24 x nuts £5.50
24 x washers £4.35
Wood for Frame 89x38mm Round Edge £79.53
2 x 8’x4’ sheets 1/2” Ply wood £40.00
2” insulation £80.00
14 x Tanks £490.00
14 x Condensation trays £40.46
2 x 6 gang Sockets £17.00
1 x 4 gang Sockets £13.20
1 x 8 gang Socket £12.49
2 Plug Timers £9.66
1 x 105cm led light £25.00
1 x 75cm Led Lights £32.00
14 x XY-380 sponge filters £115.22
14 air valves £16.28
1 double socket £4.99
Water butt £25.00
16 ball valves with 90 degree tank connectors £60.64
16 x 1/4” tees £12.80
2 x 1/4” 90 degrees £2.89
4 x 1/4 taps £6.84
14 metres of 1/4 £20.00
15 x 15mm tank connectors £95.20
23 x 90 degree 15mm £11.55
18 x 15mm taps £97.02
16 x 15mm tees £26.40
2 x 1/4” push fit to female 3/4” thread £7.98
1 x 15 push fit to 12mm barb £3.50
1 x 3/4 male to 1/4 female adaptor £13.44
1 x ezed to 1/4 male £4.00
Pro 26 female-union adaptor- EZ female £8.00
1 x 3/4 to 15 mm adaptor £6.00
30 psi shuflo pump £49.95
Pump prefilter £6.50
2 x 1/2” female to 15mm push £3.49
12 meters airline £7.95
8 meters of 15mm push fit £9.51
8 x Aquarium heaters £52.72
1 x air pump ACO 388D compressor £43.99
4 fish nets £12.00
Airline straps £5.90
Chalk Board Paint £13.00
All surface Black Paint £22.00
12mm tap and hose £6.14
Diamond drills and putty £3.14
2cm x 4.5cm wood for covers £11.85
Total To Build £1673.51
My Asking Price £800
Thanks for looking!
Advertiser: Phillip Sanderson
Advert stats: [Added or updated:04/10/20 Views: 334]